EXPLORE MORE CATEGORIES
- Home
- »
- Our Products
- »
- Plate Rolling Machine
Plate Rolling Machine
Providing you the best range of 3 roll pyramid type double pre pinch plate rolling machine, 4 rolls plate bending machine, hydraulic double pinch plate bending machine, pyramid type sheet rolling machine, 4 roll steel sheet rolling machine and 3 roll pyramid type plate bending machine with effective & timely delivery.
3 Roll Pyramid Type Double Pre Pinch Plate Rolling Machine
Product Price: Rs 30,00,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Rolling Application | Plate Rolling |
| Max Thickness | 30mm |
| Max Width | 1001–1500 mm |
| Usage/Application | Industrial |
| Material | Mild Steel |
| Automation Grade | Semi Automatic |
| Motor Power | 30 + 5 hp |
| Model Name/Number | EM DP PBM 3015 |
| Rolling Length | 1500 mm |
| Pre Rolling Thickness | 21 mm |
| Rolling Thickness | 30 mm |
| Top Roll Diameter | 360 mm |
| Bottom Roll Diameter | 325 mm |
| Dimension | 5800 x 2400 x 2300 mm (LXWXH) |
The job is fed from one end to carry out pre-pinching & entire shell is rolled to desired bend radius. Other end pre-pinching is carried out by second bottom roll to complete the shell. The complete shell is prepared in multi operation.
Features:
- 3 roll PYRAMID type design with double pre - pinching arrangement
- Top roll is fixed and bottom rolls moves up & down
- Bottom rolls up-down through hydraulic cylinders
- Two bottom rolls are power driven by planetary gearbox with electric or hydraulic motor
- Bending rolls are made of alloy steel.
- Dropper end operation by hydraulic cylinders
- Overload protection
- Low role, smooth operation and less power consumption due to hydraulic system operates at lower pressure in smaller thickness
- Built - in - cone bending attachment
- International quality Hydraulic & Electrical Component
Standard Accessories:
- Main drive motor
- Remote electric panel console with push buttons
- Manual Centralized lubrication system
- Planetary gearbox attached with Hydraulic motor
- Digital read out for both bottom Roll position
- Extended shaft for profile bending
Optional Accessories:
- Hardened & Grounded Rolls
- Automatic lubrication system
- Material feed table
- NC controls
- Side and top support for large dia meter
- Top Roll Drive
- Top Roll Interchangeable
Other Details:
- Thickness Range: 6 To 80 mm
- Length Range: 1500 To 4000 mm
Yes! I am InterestedRequest A Callback
4 Rolls Plate Bending Machine
Product Price: Rs 30,50,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Max Bending Radius | 200 mm |
| Usage/Application | Industrial |
| Material | Mild Steel |
| Bending Material | Mild Steel |
| Automation Grade | Automatic |
| Raw Material | MS, SS |
| Brand | Energy Mission |
| Country of Origin | Made in India |
| Model No | 4RL PBM 1620 |
| Rolling Length | 2000 mm |
| Pre Rolling Thickness | 10 mm |
| Rolling Thickness | 16 mm |
| Min Bending Diameter | 520 mm |
| Top Roll Diameter | 260 mm |
| Bottom Roll Diameter | 260 mm |
| Side Roll Diameter | 240 mm |
| Main Motor Power | 15 hp |
| Dimension | 5000 X 1600 X 1700 mm (LXWXH) |
To roll a given diameter on a four-roll is extremely simple. You introduce plate into the roll touching it off to the opposing Side roll for quick and accurate squaring of plate. You then raise lower central pinch roll and the plate is locked into position with no possibility of slipping. After this you back plate up to near tangent point of central rolls, then raise the left or right-side roll to the correct position to achieve your diameter and begin rolling. When the back edge gets close, simply release the left Side roll and bring up the right-side roll until it touches the plate and finish the pipe in one pass.
Features:
- 4 Roll PYRAMID type design with double pre -pinching arrangement
- High rolling Precision, no obvious residual straight seam, no need to rolling again
- High rolling roundness consistency
- It is high efficiency equipment for batch Rolling round multi section arc, Square, Conical and Special Shaped workpiece
- Top roll is fixed, bottom roll moves up & down and Side Rolls Move Inclined
- Side & Bottom rolls up-down through hydraulic cylinders
- Top Roll is power driven by planetary gear box
- Bending rolls are made of alloy steel
- Dropper end operation by hydraulic cylinders
- Overload protection
- Low role, smooth operation and less power consumption due to hydraulic system operates at lower pressure in smaller thickness
- Built - in - cone bending attachment
- International quality Hydraulic & Electrical Component
Standard Accessories:
- Main drive motor
- Manual Centralized lubrication system
- Planetary gearbox attached with Hydraulic motor
- Digital read out for both Side Roll Position & Bottom Roll
Optional Accessories:
- Hardened & Grounded Rolls
- Automatic lubrication system
- Material feed table
- NC / CNC Controls
- Side and top support for large diameter
- Top Roll Interchangeable
Other Details:
- Thickness Range :12 To 50 mm
- Length Range: 2000 To 3000 mm
Yes! I am InterestedRequest A Callback
Hydraulic Double Pinch Plate Bending Machine
Product Price: Rs 25,00,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Bending capacity | 6 mm |
| Max Bending Radius | More Than 300 mm |
| Max bending width | 1500 mm |
| Automation grade | Semi Automatic |
| Brand | Energy Mission |
| Model Name/Number | EM DP PBM 0615 |
| Motor Power | 5 + 1.5 hp |
| Country of Origin | Made in India |
| Rolling Length | 1500 mm |
| Pre Rolling Thickness | 4 mm |
| Rolling Thickness | 6 mm |
| Bottom Roll Diameter | 180 mm |
| Plate Rolling Speed | 3.0 Mtr/min |
| Dimension | 4700 x 1700 x 1550 mm |
| Top Roll Diameter | 200 mm |
The job is fed from one end to carry out pre-pinching & entire shell is rolled to desired bend radius. Other end pre-pinching is carried out by second bottom roll to complete the shell. The complete shell is prepared in multi operation.
Features:
- 3 roll PYRAMID type design with double pre - pinching arrangement
- Top roll is fixed and bottom rolls moves up & down
- Bottom rolls up-down through hydraulic cylinders
- Two bottom rolls are power driven by planetary gearbox with electric or hydraulic motor
- Bending rolls are made of alloy steel.
- Dropper end operation by hydraulic cylinders
- Overload protection
- Low role, smooth operation and less power consumption due to hydraulic system operates at lower pressure in smaller thickness
- Built - in - cone bending attachment
- International quality Hydraulic & Electrical Component
Standard Accessories:
- Main drive motor
- Remote electric panel console with push buttons
- Manual Centralized lubrication system
- Planetary gearbox attached with Hydraulic motor
- Digital read out for both bottom Roll position
- Extended shaft for profile bending
Optional Accessories:
- Hardened & Grounded Rolls
- Automatic lubrication system
- Material feed table
- NC controls
- Side and top support for large dia meter
- Top Roll Drive
- Top Roll Interchangeable
Yes! I am InterestedRequest A Callback
Pyramid Type Sheet Rolling Machine
Product Price: Rs 25,00,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Roll length | 2500 mm |
| Production Capacity | 3 ton/day |
| SS thickness | 10 mm |
| No of rolls | 4 roll |
| Material | Stainless Steel |
| Machine Type | Cold Rolling |
| Automation Grade | Automatic |
| Top Roll Diameter | 250 mm |
| Motor Power | 10 + 2 hp |
| Brand | Energy Mission |
| Model No | EM DP PBM 1615 |
| Rolling Length | 1500 mm |
| Pre Rolling Thickness | 11 mm |
| Rolling Thickness | 16 mm |
| Bottom Roll Diameter | 230 mm |
| Plate Rolling Speed | 3.0 mm |
| Dimension | 5200 x 1950 x 1800 mm (LXWXH) |
The job is fed from one end to carry out pre-pinching & entire shell is rolled to desired bend radius. Other end pre-pinching is carried out by second bottom roll to complete the shell. The complete shell is prepared in multi operation.
Features:
- 3 roll PYRAMID type design with double pre - pinching arrangement
- Top roll is fixed and bottom rolls moves up & down
- Bottom rolls up-down through hydraulic cylinders
- Two bottom rolls are power driven by planetary gearbox with electric or hydraulic motor
- Bending rolls are made of alloy steel.
- Dropper end operation by hydraulic cylinders
- Overload protection
- Low role, smooth operation and less power consumption due to hydraulic system operates at lower pressure in smaller thickness
- Built - in - cone bending attachment
- International quality Hydraulic & Electrical Component
Standard Accessories:
- Main drive motor
- Remote electric panel console with push buttons
- Manual Centralized lubrication system
- Planetary gearbox attached with Hydraulic motor
- Digital read out for both bottom Roll position
- Extended shaft for profile bending
Optional Accessories:
- Hardened & Grounded Rolls
- Automatic lubrication system
- Material feed table
- NC controls
- Side and top support for large dia meter
- Top Roll Drive
- Top Roll Interchangeable
Other Details:
- Thickness Range: 6 To 80 mm
- Length Range: 1500 To 4000 mm
Yes! I am InterestedRequest A Callback
4 Roll Steel Sheet Rolling Machine
Product Price: Rs 25,00,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Roll length | 2500 mm |
| Type of Rolling Machine | Sheet Rolling Machine |
| Max sheet thickness | 6 mm |
| Drive type | Hydraulic drive |
| Automation Grade | Automatic |
| Country of Origin | Made in India |
| Model No | 4RL PBM 2530 |
| Rolling Length | 3000 mm |
| Pre Rolling Thickness | 16 mm |
| Rolling Thickness | 25 mm |
| Min Bending Diameter | 820 mm |
| Top Roll Diameter | 410 mm |
| Bottom Roll Diameter | 390 mm |
| Dimensions | 6300 X 2100 X 2300 mm (LXWXH) |
| Brand | Energy Mission |
To roll a given diameter on a four-roll is extremely simple. You introduce plate into the roll touching it off to the opposing Side roll for quick and accurate squaring of plate. You then raise lower central pinch roll and the plate is locked into position with no possibility of slipping. After this you back plate up to near tangent point of central rolls, then raise the left or right-side roll to the correct position to achieve your diameter and begin rolling. When the back edge gets close, simply release the left Side roll and bring up the right-side roll until it touches the plate and finish the pipe in one pass.
Features:
- 4 Roll PYRAMID type design with double pre -pinching arrangement
- High rolling Precision, no obvious residual straight seam, no need to rolling again
- High rolling roundness consistency
- It is high efficiency equipment for batch Rolling round multi section arc, Square, Conical and Special Shaped workpiece
- Top roll is fixed, bottom roll moves up & down and Side Rolls Move Inclined
- Side & Bottom rolls up-down through hydraulic cylinders
- Top Roll is power driven by planetary gear box
- Bending rolls are made of alloy steel
- Dropper end operation by hydraulic cylinders
- Overload protection
- Low role, smooth operation and less power consumption due to hydraulic system operates at lower pressure in smaller thickness
- Built - in - cone bending attachment
- International quality Hydraulic & Electrical Component
Standard Accessories:
- Main drive motor
- Manual Centralized lubrication system
- Planetary gearbox attached with Hydraulic motor
- Digital read out for both Side Roll Position & Bottom Roll
Optional Accessories:
- Hardened & Grounded Rolls
- Automatic lubrication system
- Material feed table
- NC / CNC Controls
- Side and top support for large diameter
- Top Roll Interchangeable
Other Details:
- Thickness Range :12 To 50 mm
- Length Range: 2000 To 3000 mm
Yes! I am InterestedRequest A Callback
3 Roll Pyramid Type Plate Bending Machine
Product Price: Rs 25,00,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Roll length | 2500 mm |
| Production Capacity | 3 ton/day |
| Max sheet thickness | 6 mm |
| Drive type | Hydraulic drive |
| Machine Type | Cold Rolling |
| Max Bending Radius | 250 mm |
| Material | Iron |
| Brand | Energy Mission |
| Automation Grade | Automatic |
| Power | Hydraulic |
| Country of Origin | Made in India |
| Model No | EM PBM 312 |
| Rolling Length | 1250 mm |
| Rolling Thickness | 3 mm |
| Top roll Diameter | 110 mm |
| Bottom Roll Diameter | 100 mm |
| Min. Rolling Diameter | 220 mm |
| Plate Rolling Speed | 5.0 Mtr/min |
| Motor Power (Mechanical) | 3 hp |
| Motor Power (Hydro Mechanical) | 3 + 1.5 hp |
| Dimension | 3000 x 1000 x 1200 mm (LXWXH) |
Other Details:
- The capacities are based on Normal steel with yield point 260 N/mm². (2600 Kg/Cm²)
- Remaining Straight end after pre-bending 2.5 - 3 x plate thickness, depending on plate thickness.
- The minimum bending diameter is 2 x Top roll diameter, depending on plate thickness.
- Machines not mentioned above are available on request & demand.
- All data subjected to change without prior notice.
Other Details:
- Thickness Range: 4 mm to 20 mm
- Length Range: 1500 mm to 4000 mm
Yes! I am InterestedRequest A Callback
4 Roll Hydraulic Plate Bending Machine
Product Price: Rs 30,00,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Bending capacity | 12 mm |
| Max Bending Radius | More Than 300 mm |
| Max bending width | 2500 mm |
| Material | Mild Steel |
| Brand | Energy Mission |
| Automation Grade | Automatic |
| Power | Mechanical |
| Model No | 4RL PBM 1220 |
| Rolling Length | 2000 mm |
| Pre Rolling Thickness | 8 mm |
| Rolling Thickness | 12 mm |
| Min. Bending Diameter | 480 mm |
| Top Roll Diameter | 240 mm |
| Bottom Roll Diameter | 240 mm |
| Side Roll Diameter | 220 mm |
| Main Motor Power | 10 hp |
| Dimension | 4200 X 1500 X 1500 mm (LXWXH) |
To roll a given diameter on a four-roll is extremely simple. You introduce plate into the roll touching it off to the opposing Side roll for quick and accurate squaring of plate. You then raise lower central pinch roll and the plate is locked into position with no possibility of slipping. After this you back plate up to near tangent point of central rolls, then raise the left or right-side roll to the correct position to achieve your diameter and begin rolling. When the back edge gets close, simply release the left Side roll and bring up the right-side roll until it touches the plate and finish the pipe in one pass.
Features:
- 4 Roll PYRAMID type design with double pre -pinching arrangement
- High rolling Precision, no obvious residual straight seam, no need to rolling again
- High rolling roundness consistency
- It is high efficiency equipment for batch Rolling round multi section arc, Square, Conical and Special Shaped workpiece
- Top roll is fixed, bottom roll moves up & down and Side Rolls Move Inclined
- Side & Bottom rolls up-down through hydraulic cylinders
- Top Roll is power driven by planetary gear box
- Bending rolls are made of alloy steel
- Dropper end operation by hydraulic cylinders
- Overload protection
- Low role, smooth operation and less power consumption due to hydraulic system operates at lower pressure in smaller thickness
- Built - in - cone bending attachment
- International quality Hydraulic & Electrical Component
Standard Accessories:
- Main drive motor
- Manual Centralized lubrication system
- Planetary gearbox attached with Hydraulic motor
- Digital read out for both Side Roll Position & Bottom Roll
Optional Accessories:
- Hardened & Grounded Rolls
- Automatic lubrication system
- Material feed table
- NC / CNC Controls
- Side and top support for large diameter
- Top Roll Interchangeable
Other Details:
- Thickness Range :12 To 50 mm
- Length Range: 2000 To 3000 mm
Yes! I am InterestedRequest A Callback
3 Roll Pyramid Type Plate Bending Machine
Product Price: Rs 25,00,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Max Plate Thickness | 6 mm |
| Max Plate Width | 3000 mm |
| Max Bending Radius | 1500 |
| Roll Configuration | 3 Roll |
| Usage/Application | Industrial |
| Material | Mild Steel |
| Automation Grade | Automatic |
| Motor Power | 7.5 + 1.5 hp |
| Model Name/Number | EM DP PBM 1215 |
| Brand | Energy Mission |
| Top Roll Diameter | 230 mm |
| Rolling Length | 1500 mm |
| Pre Rolling Thickness | 8 mm |
| Rolling Thickness | 12 mm |
| Bottom Roll Diameter | 210 mm |
| Plate Rolling Speed | 3.0 mtr/min |
| Dimensions | 5000 x 1850 x 1700 mm (LXWXH) |
The job is fed from one end to carry out pre-pinching & entire shell is rolled to desired bend radius. Other end pre-pinching is carried out by second bottom roll to complete the shell. The complete shell is prepared in multi operation.
Features:
- 3 roll PYRAMID type design with double pre - pinching arrangement
- Top roll is fixed and bottom rolls moves up & down
- Bottom rolls up-down through hydraulic cylinders
- Two bottom rolls are power driven by planetary gearbox with electric or hydraulic motor
- Bending rolls are made of alloy steel.
- Dropper end operation by hydraulic cylinders
- Overload protection
- Low role, smooth operation and less power consumption due to hydraulic system operates at lower pressure in smaller thickness
- Built - in - cone bending attachment
- International quality Hydraulic & Electrical Component
Standard Accessories:
- Main drive motor
- Remote electric panel console with push buttons
- Manual Centralized lubrication system
- Planetary gearbox attached with Hydraulic motor
- Digital read out for both bottom Roll position
- Extended shaft for profile bending
Optional Accessories:
- Hardened & Grounded Rolls
- Automatic lubrication system
- Material feed table
- NC controls
- Side and top support for large dia meter
- Top Roll Drive
- Top Roll Interchangeable
Other Details:
- Thickness Range: 6 To 80 mm
- Length Range: 1500 To 4000 mm
Yes! I am InterestedRequest A Callback
3 Roll Pyramid Mechanical Plate Bending Machine
Product Price: Rs 10,00,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Max Plate Thickness | 4 mm |
| Max Plate Width | 3000 mm |
| Max Bending Radius | 250 mm |
| Roll Configuration | 3 Roll |
| Usage/Application | Industrial |
| Material | Mild Steel |
| Motor Power | 7.5 hp (Mechnical) |
| Model Name/Number | EM PBM 330 |
| Brand | Energy Mission |
| Automation Grade | Manual |
| Power | Mechanical |
| Top Roll Diameter | 160 mm |
| Rolling Length | 3000 |
| Rolling Thickness | 3 mm |
| Bottom Roll Diameter | 135 mm |
| Min Rolling Diameter | 320 mm |
| Plate Rolling Speed | 4.5 mtr/min |
| Dimensions | 5000 x 1150 x 1600 mm (LXWXH) |
Other Details:
- The capacities are based on Normal steel with yield point 260 N/mm². (2600 Kg/Cm²) Remaining Straight end after pre-bending 2.5 - 3 x plate thickness, depending on plate thickness.
- The minimum bending diameter is 2 x Top roll diameter, depending on plate thickness.
- Machines not mentioned above are available on request & demand.
- All data subjected to change without prior notice.
Yes! I am InterestedRequest A Callback
Hydro Mechanical Plate Bending Machine
Product Price: Rs 14,50,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Usage/Application | Industrial |
| Material | Mild Steel |
| Max Bending Radius | 200-250 mm |
| Plate Dimensions | 20 x 3000 |
| Capacity | 20mm |
| Motor Power | 20 hp |
| Brand | Energy Mission |
| Automation Grade | Automatic |
| Power | Hydraulic |
| Country of Origin | Made in India |
| Length | 3000 mm |
| Plate Thickness | 20 mm |
Salient Features:
- 3 roll PYRAMID type design machine
- The robust welded structure is made of UT tested IS:2062 M.S. plates
- The top roll adjustment is by Hydraulic Cylinder
- Bottom rolls are power driven
- Bending rolls are made of alloy steel
Other Details:
- Thickness Range: 4 To 40 mm
- Length Range: 1500 To 4000 mm
Additional Information:
- Delivery Time: 10 Weeks
- Packaging Details: Plastic wrapping
Yes! I am InterestedRequest A Callback